1070 Cooler

Bestseller No. 1
ARCTIC Accelero Xtreme IV - Graphics Card Cooler, High End VGA Cooler with 300 Watts Cooling Capactiy, three 92 mm PWM Fans
  • UNMATCHED COOLING PERFORMANCE: With a cooling capacity of 300 Watts, the Accelero Xtreme IV offers an unmatched cooling performance. The three 92 mm PWM fans and the pre-applied MX-4 thermal compound ensure efficient cooling, even under overclocking
  • BACKSIDE COOLER FOR HIGHEST EFFICIENCY: ARCTIC has developed and patented a back side cooler for unparalleled VRM and RAM cooling performance. It offers efficient cooling for RAM and voltage regulators and thus does not just allow higher clock rates but mainly increases the graphics card's service life
  • INSTALLATION WITHOUT THERMAL GLUE: Up to now the meticulous work of attaching different heatsinks with thermal glue was necessary. Thanks to the innovative back side plate this is a thing of the past. Without any thermal glue the graphics card can be returned to its original condition any time without leaving marks or residues
  • VIRTUALLY SILENT: Its low noise impeller and patented fan holder ensures the fan is ultra-quiet even under full load. Thanks to the PWM control, the fan speed adjusts according to the GPU temperature and thus the noise level remains at an absolute minimum. Accelero Xtreme IV is compatible only with the graphics card using a standard size PCB with a width of 98mm. Noise Level: 0.4 Sone at 2,000 RPM
  • MULTI-COMPATIBILITY: Accelero Xtreme IV features a versatile, problem free mounting system that allows this cooler to accommodate a wide range of graphics cards
SaleBestseller No. 2
ARCTIC MX-4 - Thermal Compound Paste for Coolers | Heat Sink Paste | Composed of Carbon Micro-Particles | Easy to Apply | High Durability - 4 Grams
  • It guarantees that heat generated from the CPU or GPU is dissipated efficiently.
  • In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time.
  • With an ideal consistency, the MX-4 is very easy to use, even for beginners.
  • Formula, the MX-4 guarantees exceptional heat dissipation from the components and supports the stability needed to push your system to its limit.
  • Composed of carbon micro-particles which lead to an extremely high thermal conductivity.
Bestseller No. 3
Graphic Card Fans GPU Cooler PCI Slot Fan Triple 92mm 90mm 9025 Fans for Graphic Card Video Card VGA Cooler
  • UNIVERSAL GPU COOLER: 3 x 92mm fans with total size 278x125x30mm (10.94x4.92x1.18inch) designed for most universal graphic card video card VGA cooling,just please check the size to make sure your pc has enough space.
  • 5V 7V 12V VOLTAGE: 1x Power D-type interface cable ,four interface with 5V 7V 12V voltage sticker,choose different voltage to get airflow: 56CFM ,84CFM ,140CFM and different noise level.
  • FAN SPLITTER CABLE:1x 4Pin fan splitter cable,you can combine 3x92mm fans into one interface to be connected with voltage cable.ignore it,Each fan can be worked independently,easy operation and replacement.
  • PACKAGE INCLUDED: 3x92mm fans(PCI bracket screwed), 1x multi-voltage cable ,1x fan splitter cable.
  • 100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have nothing to lose.
SaleBestseller No. 4
anidees Graphic Card Cooler 3 x80mm PWM Fan, Support ASUS Aura SYNC/MSI Mystic Sync/ASROCK Aura RGB/GIGABYTE RGB Fusion (5V 3 Pin Addressable headers ONLY) PCI Mount Bracket with Remote- AI-GP-CL
  • Parallel or Vertical Cooling down Graphic card directly with three high air flow RGB Fans; Sturdy Metal with aluminum brush with PCI mount design for easy installation, fit PCI-E x1/x16
  • 80mm Dual Ring RGB Fans x3 pcs: 12 independent RGB LEDs in every fan, split between two separate light loops, Rainbow and static colors.
  • Easy to use: the fan allows you to control the fan speed and LED mode by remote control, or connect to the motherboard, control the fan speed by PWM and light by 5V 3pin ASUS Aura Sync, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion 2.0 (Please note: It does not support 12V 4 pin RGB header from motherboard).
  • PWM fan speed control: allows for dynamic speed adjustment, minimizing noise or maximizing airflow.
  • RF wireless control: allow you to adjust Fan Speed and cycle through lighting effects / brightness / LED speed without opening the case.
Bestseller No. 5
Aluminum VGA Graphic Card Cooler - Graphic Card Fans - 3 x 80mm Fans with SATA+Aura 4PIN Connector VF-1
  • 1. JONSBO VF-1 Graphics Card Cooling Fan RGB Lighting Support AURA Motherboard Display Video Card Heat Sink Radiator for NVIDIA GTX/AMD RX
  • 2. The sense of the development of this products is to provide a straight-blown air supplement for those video card which don't have sufficient heat dissipation or inappropriate cooling channels by inappropriate case structure which will cause high video card temperature or high noise level
  • 3. With VF-1, it has been tested that the temperature of the video card will drop around 5 degrees celsius (different figures will be achieved from different hardware)
  • 4. There is RGB light effect on the top of VF-1, It can not only supplement the insufficient light effect of most of the video card but also provide simple and elegant light effect embellishment to the video card area
  • 5. Dual mode RGB color: Mode A: If your motherboard supports AURA RGB color change, you can connect the 4 pin plug directly to the motherboard to achieve 16 million color and breathing light mode changes. Mode B: If your motherboard does not support RGB color change, you can control the color by a combination of lighting controllers. A total of seven colors are variable.
Bestseller No. 6
NZXT Kraken G12 - GPU Mounting Kit for Kraken X Series AIO - Enhanced GPU Cooling - AMD and NVIDIA GPU Compatibility - Active Cooling for VRM, Black
  • Enhance your GPU cooling: With a 40 % increase in cooling capacity compared to stock cooling, you’ll maximize your gpu clock speeds for higher performance and better frame rates
  • Comprehensive compatibility: Supports both reference and nonreference design amd and nvidia gpus, for more than 30 liquid coolers, including aftermarket vrm heatsinks
  • Active cooling for vrm: Comes with a 92 millimeter fan, providing active cooling for the vrm and memory on the graphics card
  • Easy installation: Designed for a fast and easy installation, you can now lay the graphic card flat as you install the kraken g12
  • Supports: Kraken x42/x52/x62/72 liquid coolers
SaleBestseller No. 7
ASUS GeForce GTX 1070 TI 8GB GDDR5 Turbo Edition VR Ready DP HDMI DVI-D Graphics Card (TURBO-GTX1070TI-8G)
  • This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box
Bestseller No. 8
ARCTIC Accelero Xtreme III - AMD/NVIDIA Graphics Card Cooler, Pre-applied MX-4 Thermal Paste, incl. Three 92 mm PWM Fans
  • COOLING PERFORMANCE: 5 premium quality copper heatpipes and pre-applied MX-4 thermal compound conduct heat from the GPU efficiently to the 84-fin aluminum heatsink, meanwhile, the three 92mm PWM fans create massive airflow to bring unparallelled cooling performance, even when higher performance is required under overclocking
  • LOW NOISE: The Accelero Xtreme III cools very efficiently thanks to three ultra-quiet PWM fans, thanks to the PWM control, the speed of all fans will adjust according to the temperature of the GPU and thus the noise level remains minimal as always
  • ENHANCED RAM AND VR COOLING: The Accelero Xtreme III comes with 31 RAM and VRMheatsinks to keep your RAM and VR at optimal temperatures. The thermal adhesive facilitates heat dissipation of RAMs and VRMs and offers a strong and lasting bond
  • MULTI-COMPATIBILITY: It features a versatile and interchangeable mounting system with 31 RAM and VRM coolers in different sizes and shapes to accommodate a wide range of graphics cards. Its compatibility with CrossFire and SLI is perfect for multi-VGA setups
  • NEW FAN CONTROLLER: An improved fan controller and the use of additional filters guarantee a smooth operation with both NVIDIA and AMD graphics cards. Through software, the temperature-fan speed curve can be adjusted. No matter whether you are a hardcore-gamer or a silent enthusiast, you get the temperature and noise level exactly where you want it to be
Bestseller No. 9
EVGA GeForce GTX 1070 HYBRID GAMING, 8GB GDDR5, LED, All-In-One Water-cooling with 10CM FAN, DX12 OSD Support (PXOC) Graphics Card 08G-P4-6178-KR
  • Real Base Clock: 1594 MHz / Real Boost Clock: 1784 MHz; Memory Detail: 8192MB GDDR5
  • EVGA Hybrid - "All in One Cooling" w/o the Hassle, Just Plug and Play! Keep GPU 20-30C Cooler!
  • What you see is what you get! – No additional software required to achieve listed clock speeds
  • DX12 OSD Support with EVGA Precision XOC
  • 3 Year Warranty & EVGA's 24/7 Technical Support
Bestseller No. 10
HA9010H12F-Z 85mm 4-Pin Video Card Cooling Fan Replacement for MSI GTX 1050 1060 Graphic Card PNY GTX1070 DIY Fan
  • Fan Diameter: 85mm , Mounting screw holes distance: 40mm * 40mm * 40mm, can work for many Graphic Card as a DIY fan , please check the fan size from your own Graphic Card
  • Suitable for MSI GTX 1050/1060 Hurricane GPU
  • Suitable for PNY GTX1070 as DIY fan
  • Please keep the screw from your fan , we sell the fan not include any screw

Compare The Top 10 1070 Cooler

1070 Cooler is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.Therefore gets small percentage of comission from Amazon if you purchase from page